The Telos Link solves the problem of interconnecting production intercom systems with dial-up telephone lines. Anyone with access to a telephone, even a cellular phone, can instantly and automatically be connected with your intercom. Digital auto-nulling hybrids on both the telephone and intercom audio paths allows connections to be made without the usual gain and feedback problems, while maintaining natural, full-duplex operation. The result is significantly improved communication capability.

• An interface for RTS, ClearCom and other two-wire intercom systems is built in so that you can connect the Link to your intercom system simply as if it were another station. A front panel knob selects intercom channels.

• A "wet" single-channel operation option is selectable from the front panel. In this mode, the Link provides power to one or two belt packs and functions as a stand-alone intercom system.

• An auto-answer/auto-disconnect function is built in.

• A function to alert listeners that a call is ringing in is standard. This is provided via the 20kHz "call light" signaling function, if available in your intercom system, or by audible tone signaling.

• Monitor output is provided to hear the communications from the phone line.

• A loop-through connection is provided for a phone set.

• Link is fully remotable to allow incorporation into sophisticated systems.

• Optional rack mount kits hold one or two units in a single rack height.

Note to four-wire users:
The Telos ONE digital telephone hybrid has two software versions for intercom applications. One version is used to connect phone lines to four-wire intercoms providing functions similar to those the Link offers for two-wire intercoms. Another Telos ONE version is used to interconnect a two-wire intercom system to a four-wire intercom. Contact us if you would like more information for your installation.